Lamp Sever configuration in Ubuntu

Change www directory:
1. Open terminal (alt + shift + T)
2. Enter the following command
sudo gedit /etc/apache2/sites-available/default
3. Search for DocumentRoot
In same line replace /var/www with your own directory
4. Search for <Directory
In same line replace /var/www with your own directory

After then restart apache with the following command

sudo service apache2 restart

Example:

Setting www directory to /home/ashok path

By: rx4hvn On 03:35

Continue Reading

How to Reset Ubuntu Password

If you have ever forgotten your password, you are not alone it is probably one of the most common tech support problems I have encountered over the years. Luckily if you are using Ubuntu they made it incredibly easy to reset your password.

All it takes is adjusting the boot parameters slightly and typing a command or two, but we will walk you through it.

• Reset Your Ubuntu Password

Reboot your computer, and then as soon as you see the GRUB Loading screen, make sure to hit the ESC key so that you can get to the menu.

 If you have the option, you can choose the recovery mode item on the menu, usually found right below your default kernel option.

Then choose Drop to root shell prompt from this menu. 

This should give you a root shell prompt.

• Alternate Root Shell Method 

If you do not have the recovery mode option, this is the alternate way to manually edit the grub options to allow for a root shell.

First you will want to make sure to choose the regular boot kernel that you use (typically just the default one), and then use the e key to choose to edit that boot option.

Now just hit the down arrow key over to the kernel option, and then use the e key to switch to edit mode for the kernel option.

You will first be presented with a screen that looks very similar to this one:

You will want to remove the ro quiet splash part with the backspace key, and then add this onto the end:

rw init=/bin/bash

Once you hit enter after adjusting the kernel line, you will need to use the B key to choose to boot with that option.

At this point the system should boot up very quickly to a command prompt.

• Changing the Actual Password

You can use the following command to reset your password:

passwd < username >

After changing your password, use the following commands to reboot your system. (The sync command makes sure to write out data to the disk before rebooting).

sync
reboot -f

I found that the -f parameter was necessary to get the reboot command to work for some reason. You could always hardware reset instead, but make sure to use the sync command first.

And now you should be able to login without any issues.

By: rx4hvn On 11:52

Continue Reading

Remove Genuine Advantage Notification in Windows 7

Windows 7 may sometimes been detected as illegal, not genuine,or Pirated despite the operating system has been genuinely bought from market. Then it shows a message immediately after log on, the following Windows Activation window will be displayed.

Windows is not genuine
Your computer might not be running a counterfeit copy of Windows.
0×80070005

 Moreover, the computer desktop background is turned to black, after some time of logging in and the following error message is shown on the bottom right corner of the screen:

This copy of Windows is not genuine

When you try to view the system information in System Properties (Control Panel -> System and Security -> System), the following error message can be seen:

You must activate today. Activate Windows now

Using slmgr.vbs /dlv or slmgr.vbs /dli in an elevated command prompt with administrator privileges to view the licensing status will return the following message instead:

Error: 0×80070005 Access denied: the requested action requires elevated privileges

Normally, the suddenly or random deactivation of an activated Windows 7 on genuine platform can be resolved by simply restarting the computer, so thatWindows 7 can re-access the activation status to return the computer to activated status. However, in some cases, where modification has been done to HKU\S-1-5-20 registry key causing the Network Service account to lose and missing full control and read permissions over the registry key, the losing of activated status may happen on Windows 7 too.
Microsoft explains in KB2008385 that the possible cause for the Windows 7 turned pirated error is likely the result of applying a Plug and Play Group Policy object (GPO):
Computer Configuration -> Policies -> Windows Settings -> Security Settings -> System Services -> Plug and Play (Startup Mode: Automatic)
The Windows 7 Licensing service uses Plug and Play to obtain hardware ID information and binds the license to the computer, thus change to the setting can result in an activated system appearing to be out of tolerance. The default permissions of the Plug and Play policy do not grant the Licensing service, which runs under the Network Service account, the appropriate rights to access the Plug and Play service. To fix and resolve the Windows 7 activation lost issue, and make the Windows 7 activated and genuine again, just follow one of the two Methods stated Below:

Method I: Disable the Plug and Play Policy 

• Determine the source of the policy. To do this, follow these steps:
• On the client computer experiencing the activation error, run the Resultant Set of Policy wizard by clicking Start >> Run (or press Win+R keys), and entering rsop.msc as the command. 

• Visit the following location:

Computer Configuration -> Policies -> Windows Settings ->Security Settings -> System Services

 If the Plug and Play service is configured through a Group Policy setting, you see it here with settings other than Not Defined. Additionally, you can see which Group Policy is applying this setting.

• Disable the Group Policy settings and force the Group Policy to be reapplied.

1. Edit the Group Policy that is identified in Step 1 and change the setting to “Not Defined.” Or, follow the section below to add the required permissions for the Network Service account.
2. Force the Group Policy setting to reapply: gpupdate /force (a restart of the client is sometimes required).

Method II: Edit the permissions of the Group Policy

1. Open the Group Policy that is identified in Method I, Step 1 above, and open the corresponding Group Policy setting.
2. Click the Edit Security button, and then click the Advanced button.
3. In the Advanced Security Settings for Plug and Play window click Addand then add the SERVICE account. Then, click OK.
4. Select the following permissions in the Allow section and then click OK:Query template
   Query status
   Enumerate dependents
   Interrogate
   User-defined control
   Read permissions
5. Run gpupdate /force after applying the permissions to the Group Policy setting.
6. Verify that the appropriate permissions are applied with the following command:sc sdshow plugplay
   The following are the rights applied to the Plug and Play service in SDDL:D:(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)
   (A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)
   (A;;CCLCSWLOCRRC;;;IU)
   (A;;CCLCSWLOCRRC;;;SU)
   S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)Note: (A;;CC LC SW LO CR RC ;;;SU is an Access Control Entry (ACE) that allows the following rights to “SU” (SDDL_SERVICE – Service logon user):A: Access Allowed
   CC: Create Child
   LC: List Children
   SW: Self Write
   LO: List Object
   CR: Control Access
   RC: Read Control
   SU: Service Logon User

If there are no GPO’s in place, then another activity may have changed the default registry permissions. To resolve this problem, perform the following steps:

1. Click Start Menu, Then Run, then enter REGEDIT
2. Right-click the registry key HKEY_USERS\S-1-5-20, and select Permissions… button.
3. If the NETWORK SERVICE is not present, click Add… button.
4. In Enter the object names to select type Network Service and then click Check Names andOK.
5. Select the NETWORK SERVICE and Grant Full Control and Read permissions.
6. Restart the computer.
7. After the restart, the system may require activation. Complete the activation.

By: rx4hvn On 11:40

Continue Reading

Employees Professional 4.9.7 >> Software + Crack

Download link: https://www.dropbox.com/s/tbrddaa178cmc7u/Employees%20Professional%204.9.7.zip

Employee Professionals is a full-service professional employer organization (PEO), a legal entity that acts as your proxy employer, with all the responsibilities of an employer, except for management and supervision.

Employee Professionals is:

1. more than a payroll service
2. not a staffing or placement agency
3. not a temporary worker service
4. not a job outsource company

Step 1: Download and unpack zip archive.
Step 2: Run the setup
Step 3: Use the given keygen to activate.
Step 4: Enjoy and Support Developers, Buy It, They Deserved It!

By: rx4hvn On 11:03

Continue Reading

How to Activate Microsoft Office 2013: 32bit + 64bit _ Download Office 2013 Activator

Before start make sure your internet connection ON and Disable the firewall till you activate your product.

1. Open The folder Double Click Start-KMSmicro.vbs and start KMSmicro action.
   
2. Please be patient and allow KMSmicro load [It take 5 min in my Vmware]
   wait...
   
   wait...
   
3. Here is the KMSmicro menu Screen. When you come this stage Type >>> t <<<< (Run NetTime). If you can not type hold Ctrl+Alt to make your mouse works [This will syncronice the server time round the world]
   
4. Click yes for Host Address Time
   
5. After clicking yes open the folder and Run Activation Helper v1.5 File
   [Use x64 for 64 bit Office or x86 for 32 but Office]
   
6. Click Office or Windows Tap wharever product you want to activate. Then if it is office Click Activate Office 2013 / Office 2010.
   
7. Wait till you get the screen `Product Activation Successful

By: rx4hvn On 10:41

Continue Reading

How can I run multiple Skype accounts on Windows desktop?

To use more than one Skype account on the same computer at the same time, you need to start a new instance of Skype.

1. From the Windows taskbar, click Start > Run (or press the Windows  and R keys on your keyboard at the same time).
2. In the Run window, type the following command (including the quotes) and press OK:
For 32-bit operating systems:
"C:\Program Files\Skype\Phone\Skype.exe" /secondary
For 64-bit operating systems:
"C:\Program Files (x86)\Skype\Phone\Skype.exe" /secondary

If you get an error message, copy and paste the exact command from this page and try again.
Be aware that if you’ve changed the installation path for Skype, then you’ll need to enter the correct path for the Skype.exe file.
If the above solution fails, you can try another option:

1. Find the Skype.exe file in C:\Program Files\Skype\Phone\ if you’re running a 32-bit operating system.
If you’re running 64-bit operating system, you can find the file in C:\Program Files (x86)\Skype\Phone\.

2. Right-click the file and select Send to > Desktop (create shortcut).
3. Locate the shortcut on your desktop, then right-click it and select Properties.
4. In the Target field of the Shortcut tab, add /secondary to the end of the path. The Target field should now be "C:\Program Files\Skype\Phone\Skype.exe" /secondary.
5. Click OK. You can now start a new instance of Skype every time you double-click the new shortcut.

By: rx4hvn On 10:48

Continue Reading

Remove Shortcut Arrow from Shortcut Icons

To remove shortcut arrow from desktop icons in any type of document:

• Perform instructions described under 'Remove shortcut arrow from desktop icons'. For your convenience, steps 1 to 3 are reported here.
• Perform instructions described under 'Remove shortcut arrow from desktop icons (2)'. For your convenience, steps 4 and 5 are reported here.
• And finally, do the same with conferencelink, docshortcut, internetshortcut and wshfile.

So, here is a summary of all actions:

1. Start regedit.
2. Navigate to HKEY_CLASSES_ROOT\lnkfile
3. Delete the IsShortcut registry value.
4. Navigate to HKEY_CLASSES_ROOT\piffile
5. Delete the IsShortcut registry value.
6. Navigate to HKEY_CLASSES_ROOT\ConferenceLink
7. Delete the IsShortcut registry value.
8. Navigate to HKEY_CLASSES_ROOT\DocShortCut
9. Delete the IsShortcut registry value.
10. Navigate to HKEY_CLASSES_ROOT\InternetShortcut
11. Delete the IsShortcut registry value.
12. Navigate to HKEY_CLASSES_ROOT\WSHFile
13. Delete the IsShortcut registry value.
14. Close regedit.

Logoff and... Enjoy!

Note : Please note that in some cases deactivating the arrow for *.LNK files might lead to duplicate items in the Explorer Context menu.

By: rx4hvn On 05:56

Continue Reading